Find the synonyms or antonyms of a word
List of antonyms from "calculated to produce" to antonyms from "caliper"
Discover our 235 antonyms available for the terms "calefactor, caliber, calculating, calescent, calculatedly" and many more. Click on one of the words below and go directly to the antonyms associated with it.
- Calculated to produce (8 antonyms)
- Calculatedly (7 antonyms)
- Calculating (7 antonyms)
- Calculatingly (3 antonyms)
- Calculatings (11 antonyms)
- Calculation (5 antonyms)
- Calculations (5 antonyms)
- Calculi (2 antonyms)
- Calculous (5 antonyms)
- Calculus (2 antonyms)
- Caldera (1 antonym)
- Calefaction (6 antonyms)
- Calefactor (1 antonym)
- Calender (10 antonyms)
- Calenture (15 antonyms)
- Calescent (18 antonyms)
- Caliber (12 antonyms)
- Calibrate (25 antonyms)
- Calibrates (25 antonyms)
- Calibrating (25 antonyms)
- Calidity (6 antonyms)
- Caliginosity (15 antonyms)
- Calignosity (14 antonyms)
- Caliper (7 antonyms)
Definition of the day : « caliper »
- As in measure : verb calculate, judge
- In case the bottom surface is used, 0.150 must be deducted from the reading of the caliper.
- Extract from : « Measuring Tools » by Unknown
- It is a 26-inch caliper, and will caliper up to 34 inches diameter.
- Extract from : « Measuring Tools » by Unknown
- Then the legs are closed to remove the caliper, and are reset to the scribed line.
- Extract from : « Measuring Tools » by Unknown
- Then remove the caliper and measure the distance between the caliper points.
- Extract from : « Measuring Tools » by Unknown
- The method of adjusting a spring caliper is shown at Fig. 174, H.
- Extract from : « Aviation Engines » by Victor Wilfred Pag
- The tailstock center is next set over by guess and a caliper tool is clamped in the toolpost.
- Extract from : « Turning and Boring » by Franklin D. Jones
- The design must be worked out by eye, because of the nature of the work no caliper measurements can be made for depth of cuts.
- Extract from : « A Course In Wood Turning » by Archie S. Milton and Otto K. Wohlers
- In order to permit of ready adjustment of a spring caliper, a split nut as shown at G is sometimes used.
- Extract from : « Aviation Engines » by Victor Wilfred Pag
- The common sizes by caliper, or diameter of the trunk, are five-, seven- or nine-sixteenths of an inch.
- Extract from : « The Peaches of New York » by U. P. Hedrick
- But what are the facts left for our consideration in connection with caliper measurement?
- Extract from : « Antonio Stradivari » by Horace William Petherick